Welcome EN Quick start guide 1 Connect 2 Install 3 Enjoy 1
What’s in the box Handset Line cord User Guide Base station Power supply for base station Battery door 2 AAA rechargeable batteries Quick Start Guide Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.
EN 1 Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. B 1. A 2. Connect the power supply A A Connect the line cord to the line socket B 3. Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.
3 Enjoy Make a call Enter the phone number and press r. OR Press r and enter the phone number. Answer a call When the phone rings, press r key. End a call Press e key. Adjust earpiece volume during a call Press : to select from Volume 1 to Volume 5. Set the ring melody 1. Press m, scroll : to Personal Set and press OK, press OK to select Handset Tones, scroll : to Ring Melody and press OK. 2. Scroll : to your desired melody to play the melody. 3. Press OK to set your ring melody.
EN Switch the handset On/Off Press and hold e key for 5 seconds to switch off the handset in stand-by mode. Short press e key to switch on the handset again. Keypad lock/unlock Press and hold * key for 2 seconds to lock and unlock keypad in stand-by mode. Paging 1. Press c key on the base until the handset starts to ring. 2. Once the handset is retrieved, press e to end the paging. Press To m Enter the main menu from stand-by mode.
ΣΕ430_ΣΕ435_ΘΣΓ_ΕΝ.φµ Παγε 6 Τηυρσδαψ, Φεβρυαρψ 16, 2006 3:39 ΠΜ Troubleshooting For more information, please refer to p.48 of SE430 user manual and p.56 of SE435 user manual.
