User guide

28
EN
SMS
5. Enter the destination phone number and press OK or press d to browse : the phonebook list to select
a phone number and press
OK.
6. Enter the destination box number directly or scroll
: to the desired box number (Box 0 to Box 9) and
press
OK (only for UK).
7. Press
OK to send the message or scroll : to Save as Draft to save the message in the Draft Box and
press
OK.
8. If you select Send, the message will be sent immediately. SMS Sent! will be displayed if the message has
been sent successfully.
Inbox
The messages in the Inbox are listed according to the time of receipt, with the newest message appearing first.
The Inbox can store up to 20 messages (shared between Box 0 to Box 9).
Each time an SMS is received, you will be alerted by a beep tone (see "SMS Tone" on page 36) and the screen
displays the number of new messages received. If LED is activated, the event LED will blink until the SMS has
been reviewed.
View Inbox messages
1. Press m, press OK to select SMS, scroll : to Inbox and press OK.
2. Scroll
: to your desired box number and press OK (only for UK).
3. Enter the password and press
OK (Password is not required for Box 9) .
4. Browse the list of SMS messages and select the message you wish to read. The message list will be
displayed with the sender’s phone number or corresponding name (if the number matches the
phonebook record).
By default, the destination box is 9 (the default destination box depends on the country).
If the message cannot be sent successfully, the screen will display SMS not Sent! and the message will
be saved in the Draft Box.
WARNING When composing your SMS, if no keys are pressed for 60 seconds, the handset will
return to stand-by mode. The edited message will be automatically saved in the Draft Box.
WARNING When the message box is full, you will not be able to receive new messages. In this case,
you need to delete some old messages in order to receive new ones.
SE430_IFU_EN.book Page 28 Wednesday, September 20, 2006 2:14 PM