3% ?)&5?%. BOOK 0AGE &RIDAY $ECEMBER 0- %.
ΣΕ435_ΙΦΥ_ΕΝ.
SE430_IFU_EN.
SE430_IFU_EN.book Page 4 Wednesday, September 20, 2006 2:14 PM Important Information EN For your safety This equipment is not designed to make emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency calls. To avoid damage or malfunction: - Do not allow the product to come into contact with liquid. Do not open it as you could be exposed to high voltages. Never use any battery type other than the one supplied.
SE430_IFU_EN.book Page 5 Wednesday, September 20, 2006 2:14 PM What’s in the box? EN The following accessories are included with your SE430: Handset Base station 2 AAA rechargeable batteries Battery door Power supply for base station User Guide Quick Start Guide Line cord Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
SE430_IFU_EN.book Page 6 Wednesday, September 20, 2006 2:14 PM Your SE430 EN Overview of the handset Earpiece LCD Screen Up/Down Navigation keys Event LED Menu key/Left Soft key Right soft key/ Redial list key/ Mute key Talk key Hang-up key Alphanumeric keypad Case key/ Pause key/ Ringer off key Keypad lock key .
SE430_IFU_EN.book Page 7 Wednesday, September 20, 2006 2:14 PM Your SE430 EN Handset keys Press To m Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. > Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. r Answer an incoming external or internal call. Insert R for operator services when on the line. e Hang up a call.
SE430_IFU_EN.book Page 8 Wednesday, September 20, 2006 2:14 PM Your SE430 EN Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the handset. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels. The ringer volume is set to zero. There is an external or internal incoming call, a call is connected or a call is held.
SE430_IFU_EN.book Page 9 Wednesday, September 20, 2006 2:14 PM Your SE430 EN Overview of the base station Paging key SIM card tray Main features of your SE430 The following is an overview of the menu options that are available in your SE430. For detailed explanation of the menu options, please refer to the corresponding sections in this User Guide. Menu To Page SMS Setup, write/read SMS, etc. 27 & ALARM Set Date and time, Alarm and Alarm tone.
SE430_IFU_EN.
SE430_IFU_EN.book Page 11 Wednesday, September 20, 2006 2:14 PM Connect EN The position in which you placed the base station can have an effect on the range and performance of your SE430. Connecting the Base Station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. 1. B A 2.
SE430_IFU_EN.book Page 12 Wednesday, September 20, 2006 2:14 PM Install EN Install battery Your SE430 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. 1. Slide out the battery cover. 2. Place the batteries as indicated and replace the cover. Charge battery 1. Place the handset on the charging cradle of the base station.
SE430_IFU_EN.book Page 13 Wednesday, September 20, 2006 2:14 PM Install EN Battery life and range Talk time and stand-by time When the battery is fully charged, the talk time of your SE430 is approximately 12 hours and the stand-by time is approximately 150 hours. Low battery warning The battery level is shown at the top left of the handset screen. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon.
SE430_IFU_EN.book Page 14 Wednesday, September 20, 2006 2:14 PM Install EN Set date and time 1. Press m. 2. Scroll : to Clock & Alarm and press OK. 3. Press OK to select Set Date/Time. 4. Enter current time (HH:MM) and current date (DD/MM/YY) and press OK. WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider.
SE430_IFU_EN.book Page 15 Wednesday, September 20, 2006 2:14 PM Install EN Stand-by mode If the handset is idle for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on the base station. Screen and keypad backlight The LCD backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc.
SE430_IFU_EN.book Page 16 Wednesday, September 20, 2006 2:14 PM Install EN Press 7 four times: Philips 7. By default, the first letter of a word is in upper case. Press lower case.
SE430_IFU_EN.book Page 17 Wednesday, September 20, 2006 2:14 PM Call EN Make a call Predialling 1. Enter the phone number (maximum 24 digits). 2. Press r key to dial the number. Direct dialling 1. Press r or v key to take the line. 2. Enter the phone number. Call from redial list 1. Press > key in stand-by mode. 2. Scroll : to an entry in the redial list. 3. Press r key to dial the number. TIP The handset stores the last 10 numbers dialled.
SE430_IFU_EN.book Page 18 Wednesday, September 20, 2006 2:14 PM Call EN Answer a call When the phone rings, press r key. Handsfree answering When the phone rings, press v key. Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc. will be aborted. TIP If Auto Pick-up mode (see page 37) is activated, you can simply lift up the handset from its base station to answer the call.
SE430_IFU_EN.book Page 19 Wednesday, September 20, 2006 2:14 PM Call 2. EN Press v key again to return to normal mode. WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Adjust loudspeaker volume 1. Press : key to select from Volume 1 to Volume 5. Intercom This feature is only available when there are at least 2 registered handsets.
SE430_IFU_EN.book Page 20 Wednesday, September 20, 2006 2:14 PM Call EN Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1. Press c to put the external call on hold (the caller can no longer hear you). 2. Intercom is established immediately if there are only 2 registered handsets.
SE430_IFU_EN.book Page 21 Wednesday, September 20, 2006 2:14 PM Phonebook EN Phonebook New Entry List Entry Edit Entry Delete Entry Delete All Direct Memory Copy from SIM Phbk Transfer Your SE430 can store up to 250 phonebook memories, including 9 direct access memories (1 to 9). Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. Access phonebook 1. Press d in stand-by mode or press m, scroll : to Phonebook and press OK, scroll and press OK. 2.
SE430_IFU_EN.book Page 22 Wednesday, September 20, 2006 2:14 PM Phonebook EN 5. Scroll : to a group (, , , ) and press OK to confirm. A long confirmation beep tone is emitted. You can assign individual contacts to specific groups of your choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see "Group Melody" on page 36).
SE430_IFU_EN.book Page 23 Wednesday, September 20, 2006 2:14 PM Phonebook EN Store direct access memory You can store up to 9 direct access memories (Key 1 to mode will automatically dial the stored phone number. 9). A long press on the keys in stand-by 1. Press m, scroll : to Phonebook and press OK, scroll : to Direct Memory and press OK. 2. Select a key (Key 1 to Key 9) and press OK. If there is a stored number in that key, the number/name will be displayed. 3.
SE430_IFU_EN.book Page 24 Wednesday, September 20, 2006 2:14 PM Phonebook EN 2. Slide the SIM card between the retaining clips, microchip facing up, until it stops. 3. Put the SIM card tray back in the slot on the base station and push into place until it latches. 4. On the handset, press press OK. 5. Scroll : to Copy All or Select Entry. If you choose Copy All then all entries in the SIM card will be copied to your phonebook.
SE430_IFU_EN.book Page 25 Wednesday, September 20, 2006 2:14 PM Call log EN The call log can store up to 50 entries. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed together with the date & time of the call (if provided by the network). The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list.
SE430_IFU_EN.book Page 26 Wednesday, September 20, 2006 2:14 PM Call log EN Save redial list entry to phonebook 1. Press > key in stand-by mode and scroll : to select an entry. 2. Press m and scroll : to Copy to Phbk and press OK. 3. Enter name and press OK. 4. Edit number if necessary and press OK. 5. Edit the SMS Box number and press OK (only for UK). Default SMS Box is 9. To modify, press BACK and then enter the number (0 to 9). 6.
SE430_IFU_EN.book Page 27 Wednesday, September 20, 2006 2:14 PM SMS EN SMS Write a SMS Inbox Draft Box SMS Settings SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services.
SE430_IFU_EN.book Page 28 Wednesday, September 20, 2006 2:14 PM SMS EN 5. Enter the destination phone number and press OK or press d to browse : the phonebook list to select a phone number and press OK. 6. Enter the destination box number directly or scroll : to the desired box number (Box 0 to Box 9) and press OK (only for UK). By default, the destination box is 9 (the default destination box depends on the country). : to Save as Draft to save the message in the Draft Box and 7.
SE430_IFU_EN.book Page 29 Wednesday, September 20, 2006 2:14 PM SMS 5. EN Press OK to view the message content. TIP While reading an SMS, press : to scroll to the next or previous row, or press > to view the sender’s number and the date and time of reception. 6. When viewing the message content, you can press m to access the following options: Reply 7.
SE430_IFU_EN.book Page 30 Wednesday, September 20, 2006 2:14 PM SMS EN 5. Edit the SMS Box number and press OK (only for UK). The default SMS Box is 9. To modify, press BACK and then enter the number (0 to 9). 6. Scroll : to select a group you wish to assign for this contact. 7. Press OK to confirm. A long confirmation beep is emitted and the screen returns to display the message content. Delete an Inbox message 1. While viewing the message content, press m to display the Inbox menu options. 2.
SE430_IFU_EN.book Page 31 Wednesday, September 20, 2006 2:14 PM SMS 4. EN If you select Send, the message will be sent immediately. SMS Sent! will be displayed if the message has been sent successfully. Edit a Draft message 1. While viewing the message content, press m to display the Draft Box menu options. 2. Scroll : to Edit and press OK to start editing. 3. After editing, press OK to confirm the message. 4.
SE430_IFU_EN.book Page 32 Wednesday, September 20, 2006 2:14 PM SMS EN SMS Box (only for UK) In order to send and receive SMS messages, there must at least be 1 SMS Box created. Box 9 with empty password is created by default. You can create a maximum of 10 SMS boxes (Box 0 to Box 9), and you can protect each box with a password. To create a new SMS Box (only for UK) 1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, scroll : to select SMS Boxes and press OK. 2.
SE430_IFU_EN.book Page 33 Wednesday, September 20, 2006 2:14 PM SMS 3. Scroll : to Change Box Nr and press OK. 4. Enter the new box number and press OK to confirm box number change. EN To set outgoing number The incoming and outgoing numbers of your SE430 are already set to work on your country network. We advise you not to modify these settings. For more details or in case of any problems, please contact your local network provider. 1.
SE430_IFU_EN.book Page 34 Wednesday, September 20, 2006 2:14 PM Clock & Alarm EN Clock & Alarm Set Date/Time Alarm Alarm Tone Set date and time 1. Press m, scroll : to Clock & Alarm and press OK, press OK again to select Set Date/Time. 2. Enter current time (HH:MM) and current date (DD/MM/YY) and press OK. Enter the date in Day/Month/Year format and the time in 24-hour format. 3. A confirmation beep is emitted and the screen returns to previous menu.
SE430_IFU_EN.book Page 35 Wednesday, September 20, 2006 2:14 PM Personal Settings EN Personal Set Handset Tones Handset Name Auto Pick-up Auto Hang-up Language Babysit mode Backlight Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium. To set ring volume 1. Press m, scroll : to Personal Set and press OK, press OK to select Handset Tones and press OK to select Ring Volume. 2.
SE430_IFU_EN.book Page 36 Wednesday, September 20, 2006 2:14 PM Personal Settings EN Group Melody To benefit from this feature, you must subscribe to Caller Line ldentification service. See "Caller Line Identification" on page 20. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. You can associate 1 ring melody to each group.
SE430_IFU_EN.book Page 37 Wednesday, September 20, 2006 2:14 PM Personal Settings EN Handset Name You can name the handset and display the handset name in stand-by mode. The default handset name of your handset is PHILIPS. To rename the handset 1. Press m, scroll : to Personal Set and press OK, scroll : to Handset Name and press OK. 2. Edit the handset name and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu.
SE430_IFU_EN.book Page 38 Wednesday, September 20, 2006 2:14 PM Personal Settings EN Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 42 "To register an additional handset" ). This feature allows you to monitor e.g. the baby’s room. Place the handset in the room to be monitored.
SE430_IFU_EN.book Page 39 Wednesday, September 20, 2006 2:14 PM Advanced Settings EN Advanced Set Recall Time Dial Mode Call Barring Baby call Registration Unregister Change PIN Reset Auto prefix Country Confer. mode Recall Time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press can be set to short, medium or long. r key.
SE430_IFU_EN.book Page 40 Wednesday, September 20, 2006 2:14 PM Advanced Settings EN To set dial mode 1. Press m, scroll : to Advanced Set and press OK, scroll : to Dial Mode and press OK. 2. Scroll : to Tone or Pulse and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu. Call Barring Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers.
SE430_IFU_EN.book Page 41 Wednesday, September 20, 2006 2:14 PM Advanced Settings EN Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for baby call number.
SE430_IFU_EN.book Page 42 Wednesday, September 20, 2006 2:14 PM Advanced Settings EN Registration The procedures described below are the procedures that you will find in your SE430 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 5 handsets can be registered to one base station.
SE430_IFU_EN.book Page 43 Wednesday, September 20, 2006 2:14 PM Advanced Settings EN Change Master PIN The Master PIN is used for setting call barring/baby call number and for registration/unregistration of handsets. The default Master PIN is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required. To change Master PIN 1.
SE430_IFU_EN.book Page 44 Wednesday, September 20, 2006 2:14 PM Advanced Settings EN Auto Prefix The maximum length of an auto prefix number is 5 digits. Once the number is set, it will be automatically inserted at the beginning of each number that will be dialled. To set auto prefix number 1. Press m, scroll : to Advanced Set and press OK, scroll : to Auto prefix and press OK. 2. The last stored auto prefix number is displayed (if any). 3. Enter the number and press OK to confirm.
SE430_IFU_EN.book Page 45 Wednesday, September 20, 2006 2:14 PM Network Services EN Net. Service Call Forward Call Fwd Busy CallFwd UnAns Voice Mail Call Back Cancel CallBk Withhold ID This menu provides a convenient means for you to access, activate or deactivate some network services that are subscription dependent. Contact your network provider for more information about these services.
SE430_IFU_EN.book Page 46 Wednesday, September 20, 2006 2:14 PM Network Services EN Deactivate Call Forward 1. Press m, scroll : to Net. Service and press OK. 2. Scroll : to the type of call forwarding option you wish to deactivate (Call Forward / Call Fwd Busy / CallFwd UnAns) and press OK. 3. Scroll : to Deactivate and press OK to confirm. 4. The number string for that selected service will be dialled. 5. When the number has been dialled, presse to return to stand-by mode.
SE430_IFU_EN.book Page 47 Wednesday, September 20, 2006 2:14 PM Network Services EN Cancel Call Back Setting 1. Press m, scroll : to Net. Service and press OK, scroll : to Cancel CallBk and press OK. 2. Scroll : to Settings and press OK. 3. Enter the required number for cancelling of call back and press OK. Activate Cancel Call Back 1. Press m, scroll : to Net. Service and press OK, scroll : to Cancel CallBk and press OK. 2. Press OK to select Activate. 3.
SE430_IFU_EN.book Page 48 Wednesday, September 20, 2006 2:14 PM Troubleshooting EN Troubleshooting of the phone Problem Causes Solution The icon is not blinking when the handset is placed on the base • Bad battery contact • Move the handset slightly • Dirty contact • Clean the battery contact with a cloth moistened with alcohol • Battery is full • No need to charge • No power • Check the connections.
SE430_IFU_EN.book Page 49 Wednesday, September 20, 2006 2:14 PM Troubleshooting EN Problem Causes Solution The handset displays “not available” • The procedure to add a handset has failed • Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see page 42).
SE430_IFU_EN.book Page 50 Wednesday, September 20, 2006 2:14 PM Information EN Electric, Magnetic and Electromagnetic Fields ("EMF") 1. 2. 3. 4. 5. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.
SE430_IFU_EN.
ΣΕ435_ΙΦΥ_ΕΝ.βοοκ Παγε 3 Φριδαψ, ∆εχεµβερ 16, 2005 1:15 ΠΜ Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.
