Register your product and get support at www.philips.
1 Important 4 4 4 4 4 2 Your SDV7225T/27 6 6 3 Get started 7 7 4 Set up SDV7225T/27 7 7 8 8 8 5 Frequently asked questions 9 6 Warranty and service 9 Safety Notice for USA Notice for Canada Recycling Overview Installation For VHF/FM reception For UHF reception Mount on the wall Set up a digital tuner with this antenna 7 Glossary English Contents 10 EN 3
1 Important • Relocate the receiving antenna. • Increase the separation between equipment and receiver. Safety • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This manual contains important information about the Philips indoor television antenna. Read it carefully before you start the installation and setup.
English electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. © 2010 Koninklijke Philips Electronics N.V.
2 Your SDV7225T/27 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome.
2 Connect the DC plug to the antenna and the power supply to a 100-240V AC outlet. English 3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter.
Mount on the wall Mount two wood screws onto the wall. Ensure the distance between two screws is 80mm (3.149”). 3 Turn on the amplifier by rotating the VHF/ UHF gain control knob towards the max position until better reception is achieved. Set up a digital tuner with this antenna Tip •• For best reception, turn the gain control down to a lower setting.
6 Warranty and service Can this antenna work with Analog transmissions? Yes, this antenna can receive analog television broadcasts in the UHF and VHF bandwidths. Warranty information can be found at: www. philips.com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips.
7 Glossary A Amplifier A device, either a single stage or a large scale circuit with multiple stages for creating gain, i.e. it makes small signals larger. Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal. C Coaxial A single copper conductor, surrounded with a layer of insulation, covered by a surrounding copper shield and finally, an insulating jacket. An unbalanced transmission line with constant impedance.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. DFU_SDV7225T_27_V1.
