User Guide
Table Of Contents
- Contents
- Introduction
- General description
- Intended use
- Important safety information
- Cleaning and disinfecting
- Using the breast pump
- Feeding breast milk with the bottle
- Compatibility
- Ordering accessories
- Recycling
- Battery removal instructions
- Warranty and support
- Troubleshooting
- Supplemental information
- Storage conditions
- Electromagnetic fields (EMF)
- Technical information
- Explanation of symbols
- Sommaire
- Introduction
- Description générale
- Usage prévu
- Informations de sécurité importantes
- Avant la première utilisation
- Nettoyage et désinfection
- Utilisation du tire-lait
- Nourrir votre bébé avec un biberon de lait maternel
- Compatibilité
- Commande d'accessoires
- Recyclage
- Instructions de retrait de la batterie
- Garantie et assistance
- Dépannage
- Informations supplémentaires
- Conditions de stockage
- Champs électromagnétiques (CEM)
- Informations techniques
- Explication des symboles
17
English
English
5. The display shows the
running time.
6. Use the 'level up' and
'level down' buttons to
change the suction level
to your preference.
7. After 90 seconds the
breast pump will switch
smoothly to expression
mode and slowly
increase its vacuum to
the last used expression
suction level (or level 11
when used for the first
time).
8. If your milk starts
flowing earlier or if you
want to switch from
expression to stimulation
mode, you can switch
modes with the mode
selection button.
9. Briefly press the on/off
button if you want to
pause. To continue,
briefly press the on/off
button again.
3 sec.
10. Press and hold the
on/off button to switch
off.
11. Unplug the adapter
from the wall socket and
pull the small plug out of
the motor unit.
Tip: For optimal expression, choose the highest setting that still feels comfortable. This setting may differ
across different sessions.
Tip: You can use the double breast pump as a single breast pump by connecting only the tube of one
pump kit to the motor unit.