operation manual
Table Of Contents
- Contents
- Introduction
- General description
- Intended use
- Important safety information
- Before first use
- Cleaning and disinfecting
- Using the breast pump
- Feeding breast milk with the bottle
- Compatibility
- Ordering accessories
- Recycling
- Battery removal instructions
- Warranty and support
- Troubleshooting
- Supplemental information
- Storage conditions
- Electromagnetic fields (EMF)
- Technical information
- Explanation of symbols
- Kandungan
- Pengenalan
- Perihalan umum
- Penggunaan yang disasarkan
- Maklumat keselamatan penting
- Sebelum penggunaan pertama
- Pembersihan dan penyahjangkitan
- Menggunakan pam susu badan
- Menyusu bayi anda dengan botol
- Keserasian
- Memesan aksesori
- Kitar semula
- Arahan pengeluaran bateri
- Jaminan dan sokongan
- Penyelesai Masalah
- Maklumat tambahan
- Keadaan penyimpanan
- Medan elektromagnet (EMF)
- Maklumat teknikal
- Penerangan simbol
- 內容
- 簡介
- 一般描述
- 適合用途
- 重要安全資訊
- 第一次使用前
- 清潔和消毒
- 使用吸乳器
- 用奶瓶餵母乳
- 相容性
- 訂購配件
- 回收
- 電池拆卸說明
- 保固與支援
- 疑難排解
- 補充資訊
- 儲存條件
- 電磁波 (EMF)
- 技術資訊
- 符號說明
5. Remove the frame
from the motor unit.
6. Cut or fold the edges
of the plastic battery
frame. Remove the
battery from the plastic
battery frame.
Note: Dispose of the
rechargeable battery at a
separate local collection
point. Other parts can be
disposed at a specific
place for disposal of
electric equipment.
Warranty and support
If
you need information or support, please visit www.philips.com/support or read the international
warranty leaflet.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you
are unable to solve the problem with the information below, visit www.philips.com/support for a list
of frequently asked questions or contact the Consumer Care Center in your country.
Problem Solution
I experience pain when I
use the breast pump.
-
Choose a suction level that is comfortable for you.
-
Check if the silicone diaphragm is undamaged (does not have small
cracks, holes etc.).
-
Ensure that your nipple is placed in the center of the cushion.
-
If the pain persists, stop using the breast pump and consult your
healthcare professional.
The breast pump does
not switch on while it is
connected to the wall
socket.
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
Connect the adapter to another wall socket. Then press and hold the
on/off button to check if the breast pump can be switched on.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
24
English