operation manual

The number on the display shows the running
time in minutes.
When you change the suction level, the display
shows the selected suction level for a few
seconds and then shows the running time again.
Pumping instructions
Warning: Before you remove the pump body from your breast, always switch off the
breast pump to release the vacuum.
Warning: Do not continue pumping for more than 5 minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
Warning: If the process becomes very uncomfortable or painful, stop using the pump
and consult your healthcare professional.
Note: If you regularly express more than 125ml/4floz per session, you can purchase and use a
260ml/9floz Philips Avent Natural bottle to prevent overfilling and spillage.
Note: The breast pump can be used cordless if it is sufficiently charged, but you can also use it
connected to the wall socket.
1. Wash your hands
thoroughly with soap
and water and make
sure that your breast is
clean.
2. Place the breast pump
kit onto your breast.
Make sure that you
center your nipple.
3. Press and hold the
on/off button until the
device switches on. The
indicator lights go on to
indicate that the device
is in stimulation mode.
4. The breast pump
starts in stimulation
mode and slowly
increases its vacuum to
the last used stimulation
suction level (or level 5
when used for the first
time).
17
English
English