operation manual

5 min.
1. Fill a household pot
with enough water to
cover all parts and place
all parts in the pot. Let
the water boil for
5minutes. Make sure
the parts do not touch
the side of the pot.
2. Allow the water to
cool down.
3. Gently remove the
parts from the water.
Place the parts on a
clean surface/tea towel
or drying rack to air-dry.
4. Store the dry items in
a clean, dry and covered
container.
Using the breast pump
Cushion size
The Philips Avent single/double electric breast pump Premium has a soft, active cushion. It gently
stimulates your nipple to trigger milk flow. The cushion is made of flexible silicone, that adapts to up
to 99.98% of women, fitting nipple sizes up to 30mm.
Charging the breast pump
Fully charge the battery before you use the breast pump for the first time and when the battery is low.
Fully charging the battery takes up to 4hours.
1. Switch off the device. 2. Insert the adapter into
the wall socket and
insert the small plug at
the other end into the
motor unit.
3. The battery is
charging.
4. When the battery is
fully charged, remove
the adapter from the
wall socket and pull the
small plug out of the
motor unit.
13
English
English