operation manual

Table Of Contents

Step 1: Disassembling

Make sure that you remove the white valve from the breast pump.

Step 2: Cleaning

The parts that come in contact with milk can be cleaned manually or in the dishwasher.

Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast

pump parts as this may cause damage.

Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this

causes permanent damage to these parts.

Caution: Be careful when you remove and clean the white valve. If it gets damaged,

your breast pump does not function properly. To remove the white valve, gently pull at

the ribbed tab on the side of the valve. To clean the white valve, rub it gently between

your fingers in warm water with some dishwashing liquid. Do not insert objects into the

white valve, as this may cause damage.

Step 2A: Manual cleaning

Supplies needed:

Mild dishwashing liquid

Drinking-quality water

Soft, clean brush

Clean tea towel or drying rack

Clean sink or bowl

1. Rinse all parts under a

running tap

with

lukewarm water.

5 min.

2. Soak all parts for

5minutes in warm water

with some mild

dishwashing

liquid.

3. Clean all parts with a

cleaning brush.

4. Thoroughly rinse all

parts under a

running

tap with drinking-quality

water.

English