operation manual
8
English
• If the vacuum generated
is uncomfortable or
cause pain, switch o the
breast pump, break the
seal between the breast
and the pump funnel
with your nger, and then
remove the pump from
your breast. You can
also pull o the silicone
tube from the motor or
the cap to release the
vacuum.
• Do not continue
pumping for more than
ve minutes at a time if
no result is achieved.
• Never use any
accessories or parts from
other manufacturers
or that Philips Avent
does not specically
recommend. If you use
such accessories or
parts, your guarantee
becomes invalid.
• Do not use the breast
pump if the silicone
diaphragm appears to
be damaged or broken.
Replace the silicone
diaphragm. See chapter
well ventilation and heat
dissipation condition.
Caution
• The product should not
be left unattended when
plugged into a power
socket.
• Never drop or insert any
foreign object into any
opening or the silicone
tube.
• Do not shorten the
silicone tube.
• Before you connect
the breast pump to
the power, make sure
that the voltage of the
product corresponds to
the local power voltage.
• Wash, rinse, and sterilise
the appropriate pump
parts before each use.
• Do not use antibacterial,
abrasive cleaners,
or detergents when
cleaning breast pump
parts.
• Never put the breast
pump motor in water
or steriliser, as you
can cause permanent
damage to the pump.