operation manual

24
English
Problem Solution
Cracking/
Discoloring
• Avoid contact antibacterial or abrasive detergents/
cleaners. Combinations of detergents, cleaning
products, sterilisation solution, softened water, and
temperature uctuations may cause the plastic to
crack. If any crack is found, stop using the pump
immediately. Contact Philips Avent Consumer Care
center for spare components.
• Food coloring can discolor components, but this
will not aect your usage.
• Keep all the components away from the source
of heat or direct sunlight as it can discolor
components.
Components are
broken or lost.
• Contact Philips Avent Consumer Care center for
spare components. See back cover for contact
details.
Pump does not
response.
• Make sure the pump is correctly assembled and
press the power button to switch on.
• Make sure the cables between the pump and the
power socket are correctly connected.
Pump motor
display ashes
3 seconds, then
shuts down
automatically.
• When using the power adapter to supply power,
make sure you are using the one Philips provided.
Then make sure it is connected properly, then
switch the pump on again.
• If you use batteries to supply power, press the
power button to switch o. Replace with new
batteries and switch the pump on again.
• After checking the 2 scenarios above, if the
problem persists, contact the Consumer Care
center for help.
The silicone tube
is too loose when
it is plugged into
machine or cap.
• Change the new back up silicone tube connector.