operation manual

17
English
3 Place the assembled manual
silicone diaphragm with stem
into the pump body.Make sure
it ts securely around the rim
by pressing down with your
ngers to ensure a perfect seal.
(This is easier if assembled
whilst wet).
4 Place the forked end of the
handle under the silicone
diaphragm and stem and push
down gently on the handle until
it clicks into place.
5 Click the pump cover onto the
pump body.
6 Using the
manual breast
pump when
needed
This single electric breast pump also
provide the manual breast pump
parts for you to use manual breast
pump when needed. You can follow
the below instructions to assembly
and use.
Assembling the manual
breast pump
1 Follow steps 1-3 in "Assembling
the electric breast pump".
2 Put the stem into the manual
silicone disphragm.