operation manual

14
English
Caution
•
Do not continue pumping
for more than 5 minutes at a
time if you do not succeed
in expressing any milk. Try to
express at another time during
the day.
•
If the process becomes very
uncomfortable or painful, stop
using the pump and consult
your breastfeeding advisor.
•
Never tilt the breast pump
when the milk has reached the
maximum line on the bottle.
Replace with a new bottle
before re-pumping to avoid
spillage.
•
After expression, please take
o the bottle from pump body
immediately, then store the
bottle with sealing disc.
To pause pumping
This breast pump has a pause
function, and you can press the
pause button ( ) to pause pumping
if at any time the suction becomes
uncomfortable, there is a need to
change the bottle, reposition the
pump on the breast, or a short rest.
1 When the breast pump is in
a particular stimulation or
expression mode, press pause
button ( ) will pause the
pumping.
Tip
•
After switching o the breast
pump, break the seal between
the breast and the pump funnel
with your nger, and then
remove the pump from your
breast.
8 Disconnect the the power plug
to the power socket, and then
disconnect the power adapter
from the pump motor.
Tip
•
In order to protect the appliance,
please always shut down the
appliance by pressing the power
button instead of plugging o.
9 Unscrew the bottles from the
pump bodies ready for feeding/
storage. Clean the other used
parts of the breast pump
according to the instructions
in chapter ‘Cleaning and
sterilising’.