operation manual

13
English
Note
•
You do not need to use all
stimulation/expression levels,
only use the levels that are
comfortable for you.
•
Place the pump motor on a
stable and at surface, or hang
up steadily with the included
sling, to avoid any accidental
drops when in use. If not, this
may pull the pump body o
from the breast and cause injury.
•
If you regularly express more
than 125ml per session on
each breast, you can use a
260ml/9 oz Philips Avent
bottle to prevent overlling and
spillage.
•
If there is no operation on
this appliance (such as pause,
change stimulation level
and expression level) for
30 minutes (including in pause),
the appliance will shut down
automatically.
7 When you have nished
expressing, press the power
button ( ) to switch o the
breast pump and carefully
remove the pump body from
your breast.
Note
•
Do not worry if your milk does
not ow immediately. Relax and
continue pumping. The rst few
times you use the breast pump,
you may need to use a higher
expression mode to get your
milk owing.
•
Stimulation and expression
levels match to the number of
the owers lighting up. That is,
1 ower lighting up means level 1,
and 2 owers lighting up means
level 2.
•
When needed, you can also
use stimulation mode to do
expression.
6 During expression, you can
switch between the stimulation
mode and expression mode
by pressing the mode
selection button ( ) for better
expression.