Users Manual

16 English

Note: The link light shows that the parent unit is still on and connected to

the baby unit.

Note: When sensitivity level is not set to 'very high', low sounds will be

muted.

Note: Set the sensitivity level to 'very high' to have continuous sound

on the parent unit. Please see the Sensitivity level chapter for more

information.

All sounds are constantly transmitted to the parent unit. If your baby

cries, the display of the parent unit is still o, but the sound level lights

light up green and the sounds detected by the baby unit are transmitted

to the parent unit. As long as no sound is detected, the sound level lights

are o.

VOX mode

1 Press the mode button on the side of the parent unit to switch to VOX

mode.

Note: When the display is on, the selected mode is shown in the status

bar. The status bar is not visible when the display is o.

When the VOX mode is activated, the display and sound of the parent

unit switch o, if there is no sound detected for 20 seconds.

When sound is picked up by the baby unit, the display and sound of the

parent unit switch on immediately. The sounds are transmitted to the

parent unit and the sound level lights light up green. As long as no sound

is detected, the sound level lights are o.

Note: The minimum sound level to activate sound and display is dened

by the sensitivity setting.

20°C

AUDIO

VOX

20°C

VOX

20°C

VOX