operation manual
Table Of Contents
- Introduction
- How Philips Microdermabrasion technology works
- General description (Fig. 1)
- Important
- Charging
- Preparing for use
- Using the appliance
- Storage
- Replacement
- Ordering accessories
- Recycling
- Removing the rechargeable battery
- Warranty and support
- Troubleshooting
- Pendahuluan
- Cara kerja teknologi Mikrodermabrasi Philips
- Keterangan umum (Gbr. 1)
- Penting
- Pengisian daya
- Menyiapkan penggunaan
- Menggunakan perangkat
- Penyimpanan
- Penggantian
- Memesan aksesori
- Mendaur ulang
- Melepas baterai isi ulang
- Garansi dan dukungan
- Mengatasi masalah
- Pengenalan
- Bagaimana teknologi Philips Microdermabrasion berfungsi
- Gambaran umum (Raj. 1)
- Penting
- Pengecasan
- Bersedia untuk menggunakan
- Menggunakan alat
- Penyimpanan
- Penggantian
- Memesan aksesori
- Mengitar semula
- Mengeluarkan bateri boleh cas semula
- Jaminan dan sokongan
- Penyelesai Masalah
3 Put the appliance in the charging stand.
-
The charging light flashes white to indicate that the appliance is charging.
-
When the battery is fully charged, the charging light lights up white
continuously. After approx. 30 minutes, the charging light goes out to
save energy.
'Battery low' indication
When the battery is almost empty, the charging light flashes amber for 4
seconds during use and after you have switched off the appliance. The
battery still contains enough energy for a complete 5-minute session. When
the battery is completely empty, the device switches off automatically and
the charging light flashes amber very quickly.
Preparing for use
Make sure you have charged the appliance for 8 hours before you use it for
the first time.
Preparation
Always clean your face and gently dry it before you use the appliance.
Note: The appliance is intended for dry use only. Do not use it on a wet face
or in the shower or bathtub.
Application tips
VisaCare comes with two different tips:
10
English