operation manual

, When the battery is fully charged, the charging light lights up white
continuously for 30 minutes. After 30 minutes, the light goes out.
Note: You can use the appliance before the battery is fully charged. However, its
performance and operating time will not be optimal in this case.
’Battery low’ indication
When the battery is almost empty, the charging light ashes amber for
4 seconds during use and after you have switched off the appliance.
The battery still contains enough energy for a complete 5-minute
treatment. When the battery is completely empty, the appliance switches
off automatically and the charging light ashes amber very quickly. It is
advised to charge the appliance immediately after use.
Preparing for use
Make sure you have charged the appliance for 8 hours before you use it
for the rst time.
Preparation
Always clean and gently dry your face until it is completely dry.
Note: The appliance is intended for dry use only. Do not use it on a wet face or
in the shower or bathtub.
Application tips
VisaCare comes with two different treatment tips:
- ’Normal’ tip for regular treatment.
- ’Sensitive’ tip for mild treatment.
We advise you to use the ‘Sensitive’ treatment tip during the rst
treatments to see how your skin reacts. If the skin reacts well to the
‘Sensitive’ tip, you can try the ‘Normal’ treatment tip. See chapter
‘troubleshooting’ for normal and adverse skin reactions.
Note: Use the QR-code on the front cover or follow the link to watch the online
video for instructions on correct use of the appliance.
Using the appliance
Note: Use the appliance twice a week. Using the appliance more often may
cause skin irritation.
1 Press the on/off button to switch on the appliance.
2 When you use the appliance for the rst time, test the treatment tip
on your forearm before you use it on your face. Make a pass with
the appliance and then wait for approximately one hour. If a possible
skin reaction diminishes, you can safely use the tip on your face.
ENGLISH10