operation manual

Skin Zone timer
When you switch on the appliance, it works for three periods of 20 seconds. Between these periods, there is
a short pause to indicate that you have to move the brush head to another skin zone.
Auto shut-off
The appliance automatically switches off after one minute to prevent overtreatment.
Cleansing procedure
Note: You can use the appliance twice a day.
1 Push the brush head onto the connection pin until it locks into position with a click. (Fig. 7)
2 Moisten the brush head with water or liquid cleanser or apply the cleanser directly on your skin before
you use the appliance. Do not use the appliance with a dry brush head, as this can irritate the skin.
3 Place the brush head on your skin.
4 Press the on/off button once to switch on the appliance. The appliance starts to operate at speed 1. Press
twice for speed 2. Press three times to switch off the appliance or wait until it stops automatically. (Fig. 8)
18