operation manual

only use the Philips USB supply unit (HX9200). Contact the Consumer
Care Center to obtain this supply unit (see chapter 'Ordering
accessories').
Preparing for use
Charging the appliance
Charging the appliance takes approximately 6 hours. A fully charged appliance has a cordless operating time
of up to 30 minutes.
1 Make sure the appliance is switched off.
2 Insert the small plug in the socket of the charging stand, put the adapter in the wall socket, remove the
protection cap and put the appliance in the charging stand. (Fig. 3)
3 The charging light flashes white to indicate that the appliance is charging. When the battery is fully
charged, the charging light lights up white continuously. (Fig. 4)
13
English