operation manual
15
6 Cleaning and
maintenance
Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the
appliance.
6.1 Cleaning the appliance and the
brush head
Clean the appliance and the brush head thoroughly with
water after each use, to ensure optimum performance.
Make sure the appliance is switched off before you start
cleaning it.
1 Rinse the handle and the brush head under the tap
withwarmwater(max.40ºC/104ºF)(Fig.9).
2 Clean the back of the brush head and the connection
pin of the appliance under the tap at least once a
week(Fig.10).
3 Dry these parts with a towel.
6.2 Cleaning the adapter and the
charging stand
A Danger:
Always keep the adapter dry. Never rinse it under the
tap or immerse it in water.
ENGLISH