operation manual

14
1 Push the brush head onto the connection pin until it
locksintopositionwithaclick(Fig.6).
2 Moisten the brush head with water or liquid cleanser
or apply the cleanser directly on your skin before you
use the appliance. Do not use the appliance with a
dry brush head, as this can irritate the skin.
3 Place the brush head on your skin.
4 Press the on/off button once to switch on the
appliance. The appliance starts to operate at
speed 1. Press twice for speed 2. Press three times
to switch off the appliance or wait until it stops
automatically(Fig.7).
5 Gently move the brush head across your skin from
thenosetowardstheear(Fig.8).
Do not push the brush head too hard onto the skin
to make sure the treatment remains comfortable.
6  After20seconds,theappliancebrieypausesto
let you know that you have to move to the other
cheek(Fig.9).
7  After20seconds,theappliancebrieypausestolet
you know that you have to move the appliance to
the forehead. Gently move the brush head from left
toright.(Fig.10)
D
Note:
We advise you to not overdo the cleansing and to
not cleanse any zone longer than 20 seconds.