Operation Manual

2 To remove the attachment, put your ngers in the recesses at the
top and bottom and pull gently. The attachment should come off
easily.
3 Moisten the soft cloth supplied with the appliance with a few drops
of water and use it to clean the following parts:
- thelightexitwindow
- theoutsidesurfaceoftheattachments
- themetallicframeinsidetheattachments
- thereddishlterglassinsidetheprecisionattachment
Note: If water does not clean effectively, use a few drops of high-percentage
alcohol to clean the parts mentioned above.
Note: A contaminated light exit window and/or attachment can look like this
picture. Make sure you clean the appliance before and after each use and,
if necessary, also during the treatment according to the instructions in this
section.
Tip: If it is no longer possible to clean the edges of the attachments with the
enclosed cleaning cloth, use a cotton bud instead. Make sure that no uff
or bres stay behind on the attachments or on the light exit window.
4 If necessary, clean the outside of the appliance with the dry soft
cleaning cloth supplied with the appliance.
Storage
1 Switch off the appliance, unplug it and let it cool down.
2 Clean the appliance before you store it.
3 Put the appliance in the case or pouch supplied. Make sure the
precision attachment is on the appliance.
4 Store the appliance in a dry place at a temperature between 0°C and 60°C.
Ordering accessories
Topurchaseaccessoriesforthisappliance,pleasevisitouronlineshopat
www.shop.philips.com/service.Iftheonlineshopisnotavailablein
yourcountry,gotoyourPhilipsdealeroraPhilipsservicecentre.Ifyou
haveanydifcultiesobtainingaccessoriesforyourappliance,pleasecontact
thePhilipsConsumerCareCentreinyourcountry.Younditscontact
detailsintheworldwideguaranteeleaet.
Replacement parts
Thefollowingreplacementpartsareavailable:
- Bodyattachment
- Precisionattachment
ENGLISH24