Register your product and get support at www.philips.
a b c d e f g
BEEP PHILIPS SBT30
1 Important Safety Important Safety Instructions • • • • • • • • • Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Refer all servicing to qualified service personnel.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Power supply The speaker can operate on built-in rechargeable battery. To recharge the built-in battery: Connect micro USB socket( ) with PC through supplied USB cable. »» The power indicator( ) turns on.
3 Select “PHILIPS SBT30” on your Bluetooth device for pairing. »»The speaker beeps twice and the Bluetooth indicator( ) stays steadily on.(Blue) • For some devices, you may need to input “0000” as pairing password. 4 Start music play on your Bluetooth device. When there is an incoming call: • Press Bluetooth button( ) to pick up the call. • Press Bluetooth button( ) again to hang up the call. Tip •• You can speak to the MIC( ) to get the best speakerphone performance.
Specifications Amplifier Rated Output Power 2W RMS Signal to Noise Ratio >70dB Aux-in Link 600 mV RMS, 10 kohm Bluetooth Bluetooth specification V2.1+EDR Supported Profiles HFPv1.6, A2DPv1.2, HSPv1.2 Advanced features Echo and noise cancellations Range 10 m/33 feet line of sight General information DC power input USB: 5V, 500mA; Built-in Li-Polymer battery 3.7V 500mAH Battery working time >8 hours Dimensions-Main Unit (diameter x height) D68mm * H81mm Weight- Main Unit 0.
6 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power •• Recharge your speaker.
All registered and unregistered trademarks are property of their respective owners. © 2012 Koninklijke Philips Electronics N.V. All rights reserved. SBT30_00_UM_V1.
