Always there to help you Register your product and get support at www.philips.
1 Important Safety Important Safety Instructions a b c d e f g h i j k l m Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
2 this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada . These limits are designed to provide reasonable protection against harmful interference in a residential installation.
“For use in Mexico, the operation of this equipment is subject to the following two conditions: (1) it is possible that this computer or device does not cause harmful interference and (2) the equipment or device must accept any interference, including that may cause undesired operation. “ Environmental information All unnecessary packaging has been omitted.
Introduction With this speaker, you can enjoy audio from the compatible Bluetooth device or your PC/ Mac. a b c d e f g 3 Get started Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
The Carabiner The carabiner( 4 ) is used for easy carrying or hanging, not for climbing support or fall protection. Play Play from a Bluetooth device Note •• The effecitve operation range between the speaker and your Bluetooth device is approximately 10 meters (30 feet). 1 Slide ( ) towards to select Bluetooth audio source. »»The Bluetooth indicator( ) flashes.(Blue) 2 Activate the Bluetooth function in your Bluetooth device. 3 Select “PHILIPS SBT30” on your Bluetooth device for pairing.
PHILIPS SBT30 When there is an incoming call: • Press Bluetooth button( ) to pick up the call. • Press Bluetooth button( ) again to hang up the call. Tip •• You can speak to the MIC( ) to get the best speakerphone performance. Play from an external device 1 Slide ( ) towards AUX to select Aux-in audio source. »»The power indicator( ) turns white. 2 Connect your speaker with an external device throught the supplied USB cable. 3 Start music play on your device.
5 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2W RMS Signal to Noise Ratio >70dB Aux-in Link 600 mV RMS, 10 kohm Bluetooth Bluetooth specification V2.1+EDR Supported Profiles HFPv1.6, AD2Pv1.2, HSPv1.2 Advanced features Echo and noise cancellations Range 10 m/33 feet line of sight General information DC power input USB: 5V, 500mA; Built-in Li-Polymer battery 3.
you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power •• Recharge your speaker. No sound •• Adjust volume on your mobile phone or PC/Mac. •• Make sure that your Bluetooth mobile phone is within the effective operation range. •• Check if you have selected the correct audio source. No response from the speaker •• Restart the speaker.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. SBT30_85_UM_V1.
