User manual

12
3. Cloud monitor base Firmware
IPv6 Tab
The IPv6 page lets you enable IPv6 for PCoIP devices connected to your IPv6 network.
• Enable IPv6
Enable this field to enable IPv6 for your PCoIP devices.
• Link Local Address
This field is automatically populated.
• Gateway
Enter the gateway address.
• Enable DHCPv6
Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your
device.
• Primary DNS
The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
• Secondary DNS
The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
• Domain Name
The domain name used (e.g., ‘domain.local’) for the host or client. If DHCPv6 is enabled, this field
is automatically populated by the DHCPv6 server.