Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 2 2 Your Bluetooth speaker 3 3 3 4 3 Get started 5 5 5 Introduction What's in the box Overview of the speaker Power supply Turn on 4 Play from Bluetooth-enabled devices 6 Connect a device Play from Bluetooth device Disconnect the Bluetooth-enabled device Connect another Bluetooth-enabled device Reconnect the Bluetooth device 6 7 7 7 7 5 Other features 8 8 8 8 6 Product information 9 9 Charge your mobile devices Listen to an external device Adjust volume Specifica
1 Important Safety Warning •• Never remove the casing of this speaker. •• Never lubricate any part of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. Important safety instructions a Read these instructions. l Refer all servicing to qualified service personnel.
2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this product, you can • play audio from Bluetooth-enabled devices, or other external devices; • charge your mobile devices.
Overview of the speaker b c d a d e f g a NFC • Connect a NFC compatible device through Bluetooth. b c e CHARGING • Charge your mobile devices. • Bluetooth indicator. f AUDIO IN • Connect an external audio device. • Turn on the speaker or switch to standby mode. Disconnect the paired device. Enter Bluetooth pairing mode. g DC IN • Connect power. • • 4 d - VOL/VOL + • Adjust volume.
3 Get started Always follow the instructions in this chapter in sequence. Connect the power adaptor to: • the DC IN socket at the back of the speaker. • the wall outlet. Power supply Either AC power or battery can be used as power supply of this product. Option 1: Battery power The speaker can operate on the built-in rechargeable battery. Note Turn on Press . »» The speaker switches to Bluetooth mode. »» The Bluetooth indicator begins to flash.
4 Play from Bluetoothenabled devices 3 Tap the NFC tag on the speaker with the NFC area of your Bluetooth device. With this product, you can listen to audio from Bluetooth-enabled devices. Connect a device 4 Note •• The speaker can memorize a maximum of four paired devices. The fifth paired device will replace the first one. •• Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices.
Bluetooth indicator ( ) Description Flashing blue Connecting or waiting for connection Connected Solid blue Play from Bluetooth device After successful Bluetooth connection, play audio on the Bluetooth device. »» Audio streams from your Bluetooth device to the speaker. Disconnect the Bluetoothenabled device • • • Press and hold for two seconds; Disable Bluetooth on your device; or Move the device beyond the communication range. »» The Bluetooth indicator flashes.
5 Other features Charge your mobile devices With this speaker, you can charge your mobile devices through the CHARGING socket. Note •• The USB socket is used for charging only. •• If the speaker is powered by the built-in battery or in standby mode, you cannot charge your mobile devices. • Connect to your mobile device with a USB cable (not supplied). »» Once the device is recognized, the charging starts.
6 Product information General information Power Supply - AC Power (power adapter) Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio AUX Input 2 X 4 W RMS > 65 dBA 800 mV - Built-in Battery Charging Voltage and Current Operation Power Consumption Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - Main Unit Brand name: PHILIPS; Model: TPA103B15090-US; Input: 100-240 V~, 50/60 Hz, 1.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
8 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Notice for the USA and Canada This device complies with Part 15 of the FCC Rules and license-exempt RSS standard of Industry Canada.
Always bring your product to a professional to remove the built-in battery. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
13
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. SB365B_UM_37_V1.
