SB300 User manual Portable speaker Register your product and get support at www.philips.
Contents 1 Important 2 Your portable speaker Introduction What's in the box Overview of the speaker 3 Get started Charge the built-in battery Turn on/off 4 Play from Bluetooth devices 1 2 2 2 2 4 4 4 5 Connect a device 5 Play from a Bluetooth-enabled device 5 Control your phone call 6 Reconnect a device 6 Disconnect a device 6 Connect another device 6 Clear Bluetooth pairing information 6 5 Other features Play from external devices Turn the flashing light on/off Adjust volume 7 7 7 7 6 Specifica
1 Important Warning •• Never remove the casing of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. • • • • • Only use attachments or accessories specified by the manufacturer. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not place any sources of danger on the speaker (e.g. lighted candles).
2 Your portable speaker Overview of the speaker 1 2 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. 3 4 5 6 Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external devices.
f • • • Enter Bluetooth pairing mode. After Bluetooth connection, respond to an incoming call. Clear Bluetooth pairing information. g DC IN • Charge the built-in battery. h AUDIO IN • Connect an external audio device.
3 Get started Always follow the instructions in this chapter in sequence. Turn on/off • • Charge the built-in battery The speaker is powered by a built-in rechargeable battery. To turn on the speaker, press and hold until the blue LED indicator flashes. To turn off the speaker, press and hold until the blue LED indicator turns off. Note •• The speaker switches to standby mode automatically when being idle for 15 minutes. Note •• The micro USB socket is for charging only.
4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices. 2 3 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). Select [Philips SB300] displayed on your device for pairing and connection. If necessary, input “0000” as the pairing password. Connect a device Philips SB300 Note •• Any obstacle between this speaker and a Bluetooth device can reduce the operational range.
Control your phone call After Bluetooth connection, you can control an incoming call with this speaker. Button Function Press to answer an incoming call. Disconnect a device • • • • Press and hold for three seconds; Turn off the speaker; Disable Bluetooth on your device; or Move the device beyond the communication range. Press and hold for three seconds to reject an incoming call. Connect another device During a call, press to end the current call.
5 Other features Tip •• When you start music streaming from a connected Bluetooth device, the speaker switches to the Bluetooth source automatically. Play from external devices With this speaker, you can also listen to an external audio device such as an MP3 player. Note •• Make sure that music playback through Turn the flashing light on/off While playing, press to turn the flashing light on or off. »» When the light is turned on, its color changes randomly. Bluetooth is stopped.
6 Specifications Note Product Dimensions (W x H x D) 117 x 77 x 74 mm Product Weight 0.23 kg •• Product information is subject to change without prior notice. Rated Output Power (Amplifier) 4W RMS ≤ 1% THD Acoustic Frequency Response 110-16000 Hz Speaker Driver 1.5” full range, 4Ω Bass Enhancement 2 x passive radiator Bluetooth Version V4.0 Bluetooth Supported Profiles HFP V1.6, A2DP V1.2, AVRCP V1.4 Bluetooth Frequency Band / Output Power 2.400GHz ~ 2.
7 Trouble shooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. General No power • Recharge your speaker.
8 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Compliance Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.com/support.
Trademark notice The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. SB300_00 _UM_V2.
