Always there to help you Register your product and get support at www.philips.
Contents 1 Important Know these safety symbols Important safety instructions 2 Your product Introduction What's in the box 3 Get started Connect power Turn on Select a source Set the clock 2 2 2 3 3 3 4 4 4 4 4 4 Use Bluetooth devices Connect a Bluetooth device Disconnect a device Reconnect a device Clear pairing history 5 5 6 6 6 5 Charge through USB socket 6 6 Listen to FM radio 7 7 7 7 Play from an external device 8 8 Other features 8 8 9 9 Store radio stations Tune to a radio station S
1 Important Know these safety symbols h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer. This 'bolt of lightning' indicates uninsulated material within your unit may cause an electric shock.
Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the apparatus from the power. Note •• The type plate is located on the bottom of the product.
3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of this product. •• Risk of electric shock! When you unplug the AC power adaptor, always pull the plug from the socket. Never pull the cord. Connect the AC power adaptor between • the DC IN socket at the back of this product, and • the power supply. Select a source Press SOURCE/SET to select a source.
4 Use Bluetooth devices With this product, you can enjoy audio from a connected Bluetooth device. Note •• WOOX Innovations does not guarantee the compatibility with all Bluetooth devices. •• Before pairing a device with this product, read its user 2 3 manual for Bluetooth compatibility. Make sure that the connected Bluetooth device supports the Advanced Audio Distribution Profile (A2DP) and the Audio Video Remote Control Profile (AVRCP). •• The product can memorize a maximum of 4 paired devices.
4 On your Bluetooth device, follow the onscreen instructions to complete the pairing and connection. Disconnect a device On your device, disable the Bluetooth connection with this product. 5 Charge through USB socket You can connect your USB device to this product for charging. Note •• Before connecting another Bluetooth device, disconnect the current device first.
6 Listen to FM radio Tune to a radio station • • Note •• Keep the antenna as far as possible from TV, VCR, or other radiation sources. To tune to the previous or next strong station, press and hold - TUNING/TIME or TUNING/TIME + for 2 seconds. To tune to a specific station, switch the source to FM mode, and then press - TUNING/TIME or TUNING/TIME + repeatedly until its frequency is displayed. •• For better reception, fully extend the antenna and adjust its position.
7 Play from an external device Through an audio input cable, you can play audio that is transferred from an external audio device, for example, an MP3 player. 8 Other features Set an alarm timer Note •• Make sure that you have set the clock correctly. 1 2 3 4 1 2 3 8 Connect an audio input cable with a 3.5mm connector on both ends between • the AUDIO IN socket on this product, and • the headphone socket of an external device. Press SOURCE/SET to switch the product to the AUDIO IN mode.
Activate/deactivate alarm timer 1 2 Press AL1/AL2 to view alarm settings. Press AL1/AL2 again to activate or deactivate the alarm timer. »» The alarm icon appears if alarm timer is on and disappears if it is off. • To stop the ringing alarm, press the corresponding AL1/AL2. »» The alarm repeats ringing for the next day. 9 Product information Note •• Product information is subject to change without prior notice. General information Snooze alarm When alarm sounds, press SNOOZE.
10 Troubleshooting Tuner (FM) Tuning Range Sensitivity - Mono, 26dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.5 - 108 MHz < 22 dBf > 28 dBf < 3% > 50 dB Amplifier Rated Output Power 2 X 2.5W RMS •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this device, check the following points before requesting service.
About Bluetooth device 11 Notice The audio quality is poor after connection with a Bluetooth-enabled device. •• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Cannot connect with the device. •• The Bluetooth function of the device is not enabled.
• • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Radiation Exposure Statement: This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment.
P&F USA, Inc.
P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248 Phone 1 866 309 0845 Meet Philips at the Internet http://www.philips.com/welcome Specifications are subject to change without notice 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product.
