00_SACD_USA_COV_23801_D1 11-12-2000 15:52 Pagina 1 1000 SACD Hookup Pages
01_SACD1000_USA_23811_D1 11-12-2000 16:13 Pagina 13 English Functional overview Front of player POWER ON/OFF - switches the player on/off Stand-by indicator - lights up red when the player is in Stand-by mode SOUND MODE selects required sound mode: - for SACD: CD, Stereo or Multi-channel (if available) - for DVD/VCD: Stereo, Dolby Surround, 3D Sound or Multi-channel Display - displays the current status of the player ; PAUSE - interrupts audio/video play or moves to the next frame 2 PLAY - starts audio
01_SACD1000_USA_23811_D1 11-12-2000 16:13 Pagina 14 English Rear of player VOLTAGE SELECT(or) - For selecting 100/120V or 220/240V. If necessary, adjust the selector to match your local power supply. POWER SUPPLY - Power supply socket for connection to the power supply. Filter switch - See chapter ‘Operation - Enhanced use’. GND - Ground connector. For making grounding connection between the various components of your system in case of disturbance problems.
01_SACD1000_USA_23811_D1 11-12-2000 16:13 Pagina 18 Preparation English General notes Connecting to a Multi-channel Audio/(Video) receiver with 6 connectors - Depending on your amplifier/receiver/Stereo System, there are various ways to connect the player. These are explained in the section below. - For some connections, settings for digital and/or analogue output are required. These settings have to be made in the ‘Personal Preferences’ menu which is only accessible via your TV screen.
11-12-2000 16:13 Pagina 19 Connecting to an amplifier/receiver equipped with Dolby Pro Logic For an amplifier/receiver with Dolby Surround, you can connect your SACD player in the same way as described for Dolby Pro Logic. Dolby Pro Logic sound 1 2 Connect the audio Left and Right outputs for Front speaker connection (1) to the corresponding inputs on the Dolby Pro Logic Audio/Video amplifier/receiver using the audio cable supplied.
01_SACD1000_USA_23811_D1 11-12-2000 16:13 Pagina 20 English Connecting to a TV 6 Channel settings - DVD only Notes - Depending on your TV, there are various ways to connect the player. These are shown in the illustration below. - Please refer to your TV, VCR, and any other User Manual(s) as necessary to make the optimal connections. - Do not connect your SACD-player via your VCR because the video quality could be distorted by the copy protection system.
11-12-2000 16:13 Pagina 21 Delay times - DVD only Connecting the power supply Your SACD player is set to correctly reproduce synchronized Digital Surround Sound in a listening area where the surround speakers are about 150cm nearer to the listening position than the front speakers and the center speaker is in line with the front speakers.
01_SACD1000_USA_23811_D1 11-12-2000 16:14 Pagina 36 English Enhanced use System grounding Filter switch When your system consists of a lot of components, occasional disturbance problems (like howling noises) may occur. These problems can be solved by grounding the system. Not all amplifiers/receivers and speakers can handle the extended frequency response of SACD. Your SACD is equipped with a switchable filter on the rear.
