User manual

English
56
4 Press the small circular piece on the handle
of the Quick Clean Pod Cartridge to break the
snap hook on the handle.
5 Place the Quick Clean Pod Cartridge into the
Quick Clean Pod.
6 Put the top of the Quick Clean Pod back onto
the base and turn it clockwise until you hear a
click.
Do not tilt the Quick Clean Pod to prevent leakage.
Using the Quick Clean Pod
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, thoroughly
rinse the shaving heads before you use the Quick
Clean Pod (see 'How do I clean my appliance and
the attachments?').
Always shake excess water o the shaver before
you place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick
Clean Pod. While switched on, the shaver
automatically detects that it is in the Quick
Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately
one minute. During the cleaning program the
remaining time is displayed as a countdown
clock on the handle.