User manual

English
69
Problem Possible cause Solution
Hairs or dirt
obstruct the
shaving heads.
Clean the shaving heads
thoroughly.
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may
collect between
the inner body
and the outer
shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
appliance.
Philips Quick Clean Pod
Problem Possible cause Solution
My shaver isn't clean
after using the Philips
Quick Clean Pod.
You removed the
shaver before the
cleaning program
was nished.
Leave the shaver
in the Philips Quick
Clean Pod for the full
cleaning program.
Each cleaning
program takes
approximately 1
minute. The cleaning
icon goes out when
the cleaning program
is nished.
The Philips Quick
Clean Pod Cartridge
needs to be
replaced.
Replace the Philips
Quick Clean Pod
Cartridge.
The Philips Quick
Clean Pod is tilted.
Place the Philips
Quick Clean Pod on
a at surface.
My Philips Quick
Clean Pod does not
switch on.
The Philips Quick
Clean Pod is
powered by the
motor of the shaver.
Place the shaver into
the Philips Quick
Clean Pod. Switch on
the shaver.
The shaver is
connected to the
wall socket.
Disconnect the
shaver from the
supply unit.