User manual

English
54
3 Press the length selector and then push it to
the left or right to select the desired hair length
setting.
4 Switch on the appliance.
5 Move the appliance upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin.
6 Switch o the appliance and clean the
attachment after use.
Using the beard styler attachment without
comb
You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline to a length of 0.5 mm.
1 Pull the comb o the beard styler attachment.
Note: Grab the comb in the center to pull it o
the beard styler attachment. Do not pull at the
sides of the comb.
2 Switch on the appliance.
3 Hold the beard styler attachment perpendicular
to the skin and move the appliance downwards
while you exert gentle pressure.
4 Switch o the appliance and clean the
attachment after use.
Storage
Note: We advise you to let the appliance and its
attachments dry before you store them for the
next use.
- Store the appliance in the pouch (if supplied).
- Put the protection cap (if supplied) on the
shaver to protect it from dirt accumulation.
- Alternatively, store the appliance on the