User manual

English
60
5 Clean the cutter and guard under the tap.
6 Shake o excess water.
7 Put the shaving heads back into the shaving
unit. For detailed instructions, see 'How do I
replace the shaving heads?'.
8 Insert the hinge of the shaving head holder into
the slot in the top of the shaving unit and close
the shaving unit.
Cleaning the pop-up trimmer
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1 Make sure that the appliance is switched o
and disconnected from the wall socket.
2 Push the trimmer release slide down to open
the pop-up trimmer.
3 Switch on the appliance and rinse the pop-up
trimmer with warm water.
4 After cleaning, switch o the appliance.
5 Carefully shake o excess water and let the
pop-up trimmer air dry.
6 Close the trimmer.