User manual

34
English
4 Remove the shaving heads from the
shaving head holder.
Discard the used shaving heads
immediately to avoid mixing them with the
new shaving heads.
5 Place new shaving heads in the holder.
1
2
6 Place the retaining rings back onto the
shaving heads and turn them clockwise to
reattach the retaining rings.
-
Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until
you hear a click to indicate that the ring is
fixed.
7 Insert the hinge of the shaving head holder
into the slot in the top of the shaving unit
and close the shaving unit.