User manual

1716
ENGLISH
C
3 Hold the shaver head side down above the
shaver holder.
C
4 Place the shaver into the holder (1), push
shaver back (2) and press down the top
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
5 The battery and on/off symbol blinks to
indicate the shaver is charging.
6 Charging requires one full hour. A fully
charged shaver has a cordless shaving time
of up to 50 minutes.
C
7 Press the top cap (1), pull the shaver
forward (2) and lift shaver from holder (3).
Recharging
1 Recharging requires one full hour.
Recharge when the display indicates the
battery is almost empty.
ENGLISH
C
1 Connect cord directly to shaver (1) and
connect the power plug into any 100V to
240V AC outlet (2). Use only the power
cord provided.
An adaptor plug may be necessary for power
cord usage in some foreign countries. Use
an attachment plug adaptor of the proper
configuration for the power outlet.
The power cord will automatically convert to
work on 100V to 240V AC systems.
2 The display on the shaver will indicate
shaver is charging.
3 Charging requires one full hour. A fully
charged shaver has a cordless shaving time
of up to 50 minutes.
Charging Shaver with SmartClean
System
1 Connect the small plug to the SmartClean
System. Connect the power plug into any
100V to 240V AC outlet. Use only the
power cord provided.
C
2 Press the top cap to open the SmartClean
System.
1
2
1
2
3
1
2
3