User manual

English
67
Shaver
Problem Possible cause Solution
The appliance
does not work
when I press the
on/o button.
The appliance is
still attached to
the wall socket. For
safety reasons, the
appliance can only
be used without
cord.
Unplug the appliance and
press the on/o button to
switch on the appliance.
The rechargeable
battery is empty.
Recharge the battery (see
'Charging').
The travel lock is
activated.
Press the on/o button for
3 seconds to deactivate the
travel lock.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
Clean the shaving heads
thoroughly or replace them.
The appliance
does not shave as
well as it used to.
The shaving heads
are damaged or
worn.
Replace the shaving heads
(see 'Replacement').
Hairs or dirt
obstruct the shaving
heads.
Clean the shaving heads
in the regular way or clean
them thoroughly.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
You have not reset
the appliance.
Reset the appliance by
pressing the on/o button
for approx. 7 seconds.
A shaving
unit symbol
has suddenly
appeared on the
display.
This symbol
reminds you to
replace the shaving
heads.
Replace the shaving heads
(see 'Replacement').