User manual
English
54
When the cleaning program is done, the ready
symbol lights up continuously.
30 minutes after the cleaning program and
charging are done, the SmartClean system
switches o automatically.
The battery symbol lights up continuously to
indicate that the shaver is fully charged. Charging
takes approx. 1 hour.
Note: If you press the on/o button of the
SmartClean system during the cleaning program,
the program stops. In this case, the cleaning or
drying symbol goes out.
Note: If you disconnect the SmartClean system
from its power supply, the cleaning program stops.
Replacing the cartridge of the SmartClean
system
Replace the cleaning cartridge when the
replacement symbol ashes orange or when you
are no longer satised with the cleaning result. If
you clean the shaver in the SmartClean system
once a week, the SmartClean cartridge lasts
approximately three months.
1
While holding the SmartClean system with
one hand, press the button on the side of the
SmartClean system and lift the top part of the
SmartClean system.
2
1