User manual
English
4 Press the on/o button on SmartClean to start
the cleaning program.
During the cleaning phase, the cleaning symbol
ashes. When the cleaning phase is done (after
approx. 10 minutes), the cleaning symbol lights
up continuously.
Next, the ready symbol lights up continuously.
30 minutes after the cleaning program and
charging are done, SmartClean switches o
automatically.
The battery symbol lights up continuously
to indicate that the shaver is fully charged.
Charging takes approx. 1 hour.
5 To let the shaver dry, you can leave it in the
SmartClean system until your next shave.
You can also remove the shaver from the
SmartClean system, shake o excess uid,
open the shaving unit and let the shaver air-dry.
Press to open the SmartClean cap, to remove
the shaver from the holder ('click').
Note: If you press the on/o button of SmartClean
during the cleaning program, the program stops. In
this case, the cleaning or drying symbol goes out.
Note: If you disconnect SmartClean from its power
supply, the cleaning program stops.
Replacing the SmartClean cartridge
Replace the cleaning cartridge when the
replacement symbol ashes orange or when you
are no longer satised with the cleaning result.
If you clean the shaver with SmartClean once
a week, the cartridge lasts approximately three
months.
49
2019_s7970_3sku_en_a6_cs6_0523.indd 49 2019/05/23 16:26