User manual

67
English
Replacing the shaving heads
1 Switch o the shaver.
2 Press the release buttons on the shaving
unit and pull the shaving head holder o
the shaving unit.
3 Turn the retaining rings anticlockwise and
remove them. Place them aside in a safe
place.
4 Remove the shaving heads from the
shaving head holder.Discard the used
shaving heads immediately to avoid
mixing them with the new shaving heads.
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the
shaving heads and turn them clockwise to
reattach the retaining ring.
1
2
1
2