User manual

ENGLISH
36
ENGLISH
Replacement Shaving Heads
Indication
C ◗ The shaving heads symbol lights up
continuously when the shaver is turned off to
remind you to replace your shaving heads to
obtain optimal shaving results.
C 1 Pull the top portion of the shaving unit
straight off the shaver.
C 2 Turn the retaining ring counterclockwise
(1) and lift it off the shaving head (2).
C 3 Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
C 4 Place new shaving head in the holder.
Make sure the notches of the shaving head fit
exactly into the projections on the shaving head
holder.
37
ENGLISH
Cleaning the Beard Styler
Clean the beard styler after each use.
C 1 Pull the comb off the beard styler.
Make sure to grab the comb in the center. Do not
pull at the sides of the comb.
C 2 Rinse the beard styler and comb under
hot water. BUT BE CAREFUL TO TEST
WATER FIRST SO AS NOT TO BURN OR
SCALD HANDS.
3 Shake off excess water and allow beard
styler and comb to air dry thoroughly.
Tip: For optimal performance, lubricate the beard
styler teeth with one drop of mineral
oil every 6 months.
Replacing the Shaving Heads
◗ Replace the shaving heads once a year for
optimal shaving results.
◗ Replace damaged or worn shaving heads with
model SH70 Philips Norelco shaving heads
only.
36
1
2