SERIES 7000 SHAVER 7700 SERIES 7000 SHAVER 7500 S7720 Rechargeable Cordless Tripleheader Shaver Always here to help you Register your product and get support at www.norelco.
ENGLISH 4 Congratulations on your purchase and welcome to Philips Norelco! S7720 To fully benefit from the support that Philips Norelco offers, register your product at www.norelco.
4 ENGLISH IMPORTANT SAFETY INSTRUCTIONS When using an electric appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: 1. Do not reach for a corded shaver/SmartClean System that has fallen into water. Unplug immediately. 2. Power plug and the accessories connected to it are not for immersion or for use in shower. 3. Do not use an extension cord with this appliance. 4.
6 ENGLISH ENGLISH Table of Contents 45 - DAY MONEY-BACK GUARANTEE To enjoy the closest and most comfortable shave from your new Philips Norelco Men’s Shaver, the shaver should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Philips Norelco Shaving System. If, after that period of time, you are not fully satisfied with your Philips Norelco Men’s Shaver, send the product back along with dated sales receipt and we’ll refund you the full purchase price.
8 ENGLISH ENGLISH 9 Features DynamicFlex Technology Shaving Unit • Hair Chamber captures shaven hair Comfort Rings Electronic On/Off Button Cleaning Indicator Replacement Shaving Heads Indicator Travel Lock SmartClick Precision Trimmer or Styler* Automatic Worldwide Voltage 100V to 240V AC Travel Case Rechargeable 1-hour full charge for up to 50 min.
ENGLISH 10 11 Features SmartClean System SmartClean System Cap Shaver Holder On/Off Button Charging Indicator Ready Indicator Cleaning Cartridge Replacement Indicator Cleaning Indicator Cleaning Cartridge Release Button Cleaning Cartridge
12 ENGLISH ENGLISH LED Display ◗ Remove any sticker or protective foil from the display before using shaver. ◗ The display provides the following information: ◗ Charging Indicator - When the shaver is charging, the bottom charging light blinks and then lights up continuously. As charging continues, each charging light will blink and then light up continuously until the shaver is fully charged.
14 ENGLISH ENGLISH Lock C ◗TheTravel shaver is equipped with a travel lock function. Important ◗ Only use the power cord or SmartClean System provided to charge the shaver. ◗ The power plug transforms 100-240V AC to less than 24V DC. You can use the travel lock function when you are going to store the shaver for a longer period or if you are going to take the shaver with you when traveling. See ‘Travel Lock’ section for instructions on how to use this function.
16 ENGLISH ENGLISH The power cord will automatically convert to work on 100V to 240V AC systems. 2 The display on the shaver will indicate shaver is charging. 3 Charging requires one full hour. A fully charged shaver has a cordless shaving time of up to 50 minutes. C 1 2 Charging Shaver with SmartClean System 1 C C 2 3 Connect the small plug to the SmartClean System. Connect the power plug into any 100V to 240V AC outlet. Use only the power cord provided.
18 ENGLISH ENGLISH Put It To The Test & Shaving Tips ◗ 21 Day Trial and Conversion Process. It is a fact that your skin and beard need time to adjust to a new shaving system. ◗ Use your new shaver exclusively for 3 weeks to fully enjoy the closeness of a Philips Norelco shave. ◗ At first you may not get as close a shave as you expect, or your face may even become slightly irritated. This is normal since your beard and skin will need time to adjust.
20 ENGLISH C ENGLISH 1 21 Using the SmartClick Trimmer Apply some water to your skin. To Groom Sideburns and Moustache 1 Pull the shaving unit straight off the shaver. C NOTE: Do not turn the shaving unit while you C C 2 Apply shaving foam or gel to your skin. 3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin. 4 Press the on/off button once to switch on the shaver. 5 Move the shaving heads in circular movements over your skin.
22 ENGLISH C ENGLISH 9 C 10 Insert the raised notch of the shaving unit into the slot in the top of the shaver. Press the shaving unit down to attach it to the shaver.You will hear a ‘click’. ◗ Always comb beard and/or moustache with a fine comb before using the styler. ◗ The hair length settings on the styler correspond to the remaining hair length after trimming. There are 5 settings from 3/64 in. – 3/16 in. (1-5mm). Place the shaver in the SmartClean System to protect the heads.
24 ENGLISH ENGLISH Styling without Comb Attachment C 7 Insert the raised notch of the shaving unit into the slot in the top of the shaver. Press the shaving unit down to attach it to the shaver.You will hear a ‘click’. C 8 Place the shaver in the SmartClean System to protect the heads. ◗ Use the SmartClick styler without the comb to contour your beard, moustache, sideburns or neckline. C 1 Pull the comb off the SmartClick styler. Make sure to grab the comb in the center.
26 ENGLISH ENGLISH Deactivating the travel lock C 1 Press the ON/OFF button for 3 seconds. 2 The lock symbol blinks and then lights up continuously. The shaver is now ready for use. Cleaning the Shaving Unit The shaving heads may be quickly cleaned after each use by rinsing with hot water. Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. BThe shaver unlocks automatically when charging in the SmartClean System.
28 ENGLISH ENGLISH 4 Carefully shake off excess water and let the shaving unit air dry completely. ◗ The charging plug converts 100-240V AC to less than 24V DC. ◗ Place the SmartClean System on a flat, stable and fluid-resistant surface to avoid any leakage. Be careful not to tip or move the SmartClean System when it is ready for use. ◗ Use this appliance for its intended household use as described in this manual. NOTE: Do not wipe or dry the shaving unit with a towel or tissue.
30 ENGLISH ENGLISH C 4 Place the cleaning cartridge in the SmartClean System. C 5 While holding the SmartClean System with one hand, gently push the top part of the SmartClean System back down.You will hear a 'click'. When the SmartClean System is ready for use, do not move appliance to prevent leakage. Cleaning the Shaver in the SmartClean System ◗ If the shaver does not contain enough power for one (1) shave, the SmartClean System may not work properly.
32 ENGLISH ENGLISH Press the ON/OFF button ( ) on the SmartClean System to start the cleaning cycle. 8 C C 11 2 Press the top cap down (1), pull the shaver forward (2) and lift shaver from SmartClean holder (3). ◗ The SmartClean System automatically turns off 30 minutes after the cleaning cycle is complete. The ON/OFF button ( ) and cleaning symbol ( ) will light up continuously. 9 ◗ The cleaning cycle takes approximately 10 minutes.
ENGLISH 34 C C C C 1 2 C ENGLISH Remove one shaving head from the shaving head holder. Remove the cutter from the comb. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally put a cutter in the wrong comb, it may take several weeks before optimal shaving performance is restored. 4 5 6 Clean the cutter and comb under warm tap water. After cleaning, place the cutter back into the comb with the cutter legs pointing downwards.
36 ENGLISH ENGLISH Cleaning the Beard Styler Replacement Shaving Heads Indication Clean the beard styler after each use. C C C ◗ The shaving heads symbol lights up continuously when the shaver is turned off to remind you to replace your shaving heads to obtain optimal shaving results. 1 Pull the comb off the beard styler. Make sure to grab the comb in the center. Do not pull at the sides of the comb. 2 Rinse the beard styler and comb under hot water.
ENGLISH 38 C 1 2 C ENGLISH Hold the shaving head holder in your hand and place the retaining ring on the shaving head holder (1). Turn clockwise (2) to reattach the retaining ring. Do not place the shaving head holder on a surface, as damage may occur. 5 6 Repeat this process for the other two cutters and combs. 7 Reattach the shaving head holder to the bottom part of the shaving unit. 8 To reset the shaver, press and hold the On/ Off button for approximately 7 seconds. 7 sec.
40 ENGLISH ENGLISH Maintenance Assistance ◗ Always remove shaver from the SmartClean System before cleaning appliance. ◗ The SmartClean System and shaver may be wiped clean using a damp cloth. ◗ Water from the tap should be on a warm setting to clean any washable parts. ◗ For assistance, visit our website: NOTE: DO NOT place or clean any parts of the SmartClean System in a dishwasher. Storage he shaver can be placed in the travel case or C ◗ TSmartClean System for safe storage.
42 ENGLISH ENGLISH Accessories C ◗ Replacement Shaving Heads Model SH70 - For maximum shaver performance, replace your Philips Norelco shaving heads once a year.
