User manual

English
Problem Possible cause Solution
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
You have not reset
the replacement
reminder.
To reset the replacement
reminder, press and hold
the on/o button for more
than 7 seconds.
A shaving
head symbol
has suddenly
appeared on the
display.
This symbol is
the replacement
reminder.
Replace the shaving
heads.
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
SmartClean system
Problem
Possible cause Solution
The SmartClean
system does
not work when I
press the on/o
button.
The SmartClean
system is not
connected to the
wall socket.
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
The cleaning
cartridge is empty.
The replacement
symbol ashes to
indicate that you
have to replace the
cleaning cartridge.
Place a new cleaning
cartridge in the SmartClean
system.
51
s668026ena6cs60220.indd51 2019/02/1912:08