User manual

Problem Possible cause Solution
The travel lock is
activated.
Press the on/off button
for 3 seconds to
deactivate the travel lock.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
Clean the shaving heads
thoroughly (see 'Thorough
cleaning') or replace them.
Theappliancedo
es not shave as
well as it used to.
The shaving heads
are damaged or
worn.
Replace the shaving
heads.
Hairs or dirt
obstruct the shaving
heads.
Clean the shaving heads
in the regular way or clean
them thoroughly (see
'Thorough cleaning').
I replaced the
shaving heads,
but the
replacement
reminder is still
showing.
You have not reset
the replacement
reminder.
To reset the replacement
reminder, press and hold
the on/off button for more
than 7 seconds.
A shaving head
symbol has
suddenly
appeared on the
display.
This symbol is the
replacement
reminder.
Replace the shaving
heads.
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
29
English