User manual

23
English
1
2
3 Turn the retaining rings counterclockwise and
remove them. Place them aside in a safe place.
4 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately
to avoid mixing them with the new shaving
heads.
5 Place new shaving heads in the holder.
1
2
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining rings.
-
Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate that the ring is fixed.
7 Insert the hinge of the shaving head holder
into the slot in the top of the shaving unit and
close the shaving unit.