Tripleheader shaver Series 6000 BC
10 11 12 1 2 9 3 4 8 5 6 7
empty page before TOC
English 6 Español 28
English Contents IMPORTANT SAFETY INSTRUCTIONS______________________ Introduction / Registration _____________________________ General description ____________________________________ What do the icons on my product handle mean?___________ How do I charge my product? ___________________________ How do I use my product? ______________________________ How do I clean my shaver? ______________________________ Storage and travel _____________________________________ How do I replace the shaving heads? ______
English 7 IMPORTANT SAFETY INSTRUCTIONS When using an electric product, basic precautions should always be followed, including the following: Read all instructions before using this product. DANGER To reduce the risk of electric shock: - Do not reach for a corded product that has fallen into water. Unplug immediately from the power outlet. - Keep the power cord dry. - Do not place or store the product where it can fall or be pulled into a tub or sink.
English - This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product. - Use this product only for its intended household use as described in this manual.
English 9 - Only use original Philips accessories or consumables. Only use detachable power cord HQ8505. - Charge, use and store the product at a temperature between 5 °C and 35 °C. - Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures. - If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
English Introduction/Registration Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome or via the app.
English 11 What do the icons on my product handle mean? Icon Behavior Meaning Flashing when Clean the shaver with warm water. you switch off the product Flashing when you press the on/off button The travel lock is activated (see 'Storage and travel'). Lights up when you pick up the product The number of bars lit up show the remaining battery charge. Bottom light flashing orange The battery is almost empty (see 'How do I charge my product?'). Lights flashing in sequence The product is charging.
English Quick Charge: After approx. 5 minutes of charging, the battery contains enough energy for one full shave. When the product is fully charged it has a cordless operating time of up to 60 minutes. Note: You cannot use the product while it is charging. Charging with the power cord 1 Make sure that the product is switched off. 2 Insert the small plug into the product and put the power plug in the power outlet.
English 13 'Unplug for use' symbol The 'unplug for use' symbol flashes to remind you to disconnect the power cord from the power outlet and remove the small plug from the product before you switch it on. How do I use my product? Always check the product and all accessories before using. Do not use the product or any accessory if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type. Note: This product is waterproof.
English 2 Move the shaving heads over your skin in circular movements to catch all hairs growing in different directions. Make sure each shaving head is fully in contact with the skin. Exert gentle pressure for a close, comfortable shave. Note: Do not press too hard, as this can cause skin irritation. Note: If you are shaving with gel or foam, rinse the shaving unit regularly during your shave to ensure that it continues to glide smoothly over your skin.
English 15 - Use your new shaver exclusively for 3 weeks to fully enjoy the closeness of a Philips Norelco shave. - At first you may not get as close a shave as you expect, or your face may even become slightly irritated. This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you'll soon experience the full joy of your new shaver.
English Using the click-on attachments Note: The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product. Using the beard styler attachment with comb You can use the beard styler attachment with the comb attached to style your beard at one fixed setting or at different length settings. You can also use it to pre-trim any long hairs before shaving for a more comfortable shave.
English 17 5 Move the product upwards while you exert gentle pressure. Make sure the front of the comb is in full contact with the skin. 6 Switch off the product and clean the attachment after each use (see 'How do I clean my shaver?'). Using the beard styler attachment without comb You can use the beard styler attachment without the comb to contour your beard, moustache, sideburns or neckline to a length of 0.5 mm. 1 Pull the comb off the beard styler attachment.
English Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. While rinsing the shaving unit, water may drip out of the base of the shaver. This is a normal occurrence. 1 Switch on the shaver. 2 Rinse the shaving unit under a warm tap. 3 Switch off the shaver. Press the release button to open the shaving unit. 4 Rinse the hair chamber under a warm tap. 5 Rinse the shaving head holder under a warm tap.
English 19 7 Close the shaving unit. Thorough cleaning We advise you to clean the shaving heads thoroughly once a month or when the shaver does not shave as well as it used to. 1 Make sure that the product is switched off and disconnected from the power outlet. 2 Press the release button on the shaving unit and pull the shaving head holder off the shaving unit. 3 Rinse the hair chamber and shaving head holder under the tap. 4 Remove the shaving heads.
English 5 Clean the cutter and guard under the tap. 6 Shake off excess water. 7 Put the shaving heads back into the shaving head holder. For detailed instructions, see 'How do I replace the shaving heads?'. 8 Insert the hinge of the shaving head holder into the slot in the top of the shaving unit and close the shaving unit. Cleaning the click-on attachments Never dry the trimmer or beard styler attachments with a towel or tissue, as this may damage the trimming teeth.
English 21 Never dry the cutting unit with a towel or tissue, as this may damage the trimming teeth. Tip: For optimal performance, lubricate the teeth of the beard styler attachment with a drop of sewing machine oil regularly. Storage and travel - Be sure the product is switched off. Remove the power cord from power outlet and the product before storing it in a safe, dry location where it will not be crushed, banged, or subject to damage. - Do not wrap cord around the product when storing.
English Activating the travel lock Press the on/off button for 3 seconds to use the travel lock mode. 3 sec. When the travel lock is activated, the travel lock symbol flashes. Deactivating the travel lock Press the on/off button for 3 seconds. Once the travel lock is deactivated, the product switches on automatically. Note: The product unlocks automatically when connected to a power outlet. How do I replace the shaving heads? For maximum shaving performance, replace the shaving heads once a year.
English 1 23 3 Turn the retaining rings counterclockwise and remove them. Place them aside in a safe place. 2 4 Remove the shaving heads from the shaving head holder. Discard the used shaving heads immediately to avoid mixing them with the new shaving heads. 5 Place new shaving heads in the holder. 6 Place the retaining rings back onto the shaving heads and turn them clockwise to reattach the retaining rings.
English Accessories Replacement parts and accessories may be purchased at a store near you or on our website www.philips.com/store. The following accessories and spare parts are available: - SH71 Philips Norelco replacement shaving heads Assistance For assistance, visit our website: www.philips.com/support or call toll free 1-800-243-3050. Online information is available 24 hours a day, 7 days a week.
English 25 - Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com. Full One-Year Warranty Philips North America LLC warrants this product (except shaving heads) against defects in materials or workmanship for a period of one year from the date of purchase, and agrees to repair or replace any defective product without charge.
English This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you. *Read enclosed instructions carefully.
English 27
Manufactured for: Philips Personal Health a division of Philips North America LLC P.O. Box 10313, Stamford, CT 06904 This symbol on the product’s nameplate means it is listed by Underwriters’ Laboratories, Inc. Norelco and Tripleheader are registered trademarks of Philips North America LLC. PHILIPS and Philips shield are registered trademarks of Koninklijke Philips N.V. ©2023 Philips North America LLC. All rights reserved. 3000.115.4422.
