User manual

Table Of Contents
19
English
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
1
Place the shaver upside down into the Quick Clean
Pod. The shaver automatically detects that it is in the
Quick Clean Pod.
2
Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the cleaning
symbol lights up continuously and the blue icon
pulses.
The shaver handle vibrates twice quickly when the
cleaning program is finished.
3
Let the shaver air-dry completely in the Quick Clean
Pod before storing it.
Replacing the Quick Clean Pod Cartridge (specific models
only)
Replace the Quick Clean Pod Cartridge immediately
when the cartridge replacement icon on the Quick Clean
Pod becomes visible or follow the table below.
Frequency of use Cycles When to replace the
Quick Clean Pod
Cartridge
Every day About 30 Every month
A few times per week About 20 Every 2 months
Every week About 13 Every 3 months
Every month About 3 Every 3 months
1
Twist and remove the top of the Quick Clean Pod.