User manual

Haare in der Nase schneiden
Make sure both the nose/ear trimmer attachment
and nasal passages are clean before trimming.
1 Twist the shaving head or other attachment to
remove it from the handle and press the
nose/ear hair trimmer onto the handle.
2 Schalten Sie das Gerät ein.
3 Führen Sie den Schneidekopf vorsichtig in ein
Nasenloch ein.
Führen Sie den Aufsatz nicht weiter als 0,5cm
in die Nase ein.
4 Slowly move the trimming head around inside
each nostril, making sure the side of the tip is
held firmly against the skin. This reduces the
tickling effect that can occur.
5 Schalten Sie das Gerät ab und reinigen Sie den
Aufsatz nach der Verwendung.
Dried nasal mucus can block the cutting element,
preventing the appliance from switching on. If the
cutting element is blocked, clean the attachment.
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
1 Schalten Sie das Gerät ein.
2 Slowly move the trimming head along the rim of
the ear to remove hairs that stick out beyond
the rim.
3 Carefully insert the trimming head into the
outer ear channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could
damage the eardrum.
17
Deutsch