User manual

35
English
Charging with the supply unit
1 Make sure that the appliance is switched
o.
2 Insert the small plug into the appliance
and put the supply unit in the wall socket.
- While the appliance is in quick charge
mode, the lights of the battery status
indicator light up one after the other.
After approximately 5 minutes, the
bottom light of the battery status
indicator ashes. The battery now
contains enough energy for one shave.
- While the appliance charges, rst the
bottom light of the battery status
indicator ashes and then lights
up continuously. Next the second
light ashes and then lights up
continuously, and so on until the
appliance is fully charged.
- When the appliance is fully charged, all
three battery indicator lights light up
continuously. After approx. 30 minutes,
the light goes out automatically.
3 After charging, remove the supply unit
from the wall socket and pull the small
plug out of the appliance.