User manual
ENGLISH
23
1 Turn shaver OFF.
C 2 Press the shaver head release button and
open the shaving unit.
C 3 Pull the shaving head holder off the
bottom part of the shaving unit.
C 4 Turn the retaining ring counterclockwise
(1) and lift it off the shaving head (2).
C 5 Remove one shaving head from the shaving
head holder. Remove the cutter from the
comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C 6 Clean the cutter and comb under warm
tap water.
1
2