User Guide

19
English
5
Remove the shaving heads from the shaving head
holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
6
Place the new shaving heads in the shaving head
holder.
Note: Make sure that the projections of the shaving
heads fit exactly into the recesses of the shaving
head holder.
1
2
7
Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining rings.
Each retaining ring has two recesses and two
projections that fit exactly in the projections and
recesses of the shaving head holder.
- Turn the ring clockwise until your hear a click to
indicate that the ring is fixed.
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach
the retaining rings. Do not place the shaving head
holder on a surface, as this may cause damage to
the shaving heads.